Adding a contact using an existing address, Viewing contact information – the contact flyout – CounterPath X-Lite 4.6 for Windows User Guide User Manual
X-Lite for Windows User Guide
This example shows how to add a contact when your VoIP service supports online availability via your SIP
Adding a Contact Using an Existing Address
You can add a contact by capturing existing information:
If you are on a phone call with a non-contact, click the Add to Contacts button in the call panel.
On the History tab, select an entry that is not a contact. Right-click and choose Add as Contact.
The Contact Profile dialog appears. Complete the dialog as desired and press OK.
If the contact method is Softphone or Jabber, an online status request is sent to this person. See “Sharing Online
Status” on page 31.
Viewing Contact Information – the Contact Flyout
Click a contact to show the Contact flyout.
Enter the person’s phone
number in any phone field
As soon as you add a Softphone
entry, this field automatically
appears. X-Lite will share online
presence information with this
person using this phone number.
Click a contact method
to perform its action