Chapter 4: technical specifications, Features, Motion control modes – ElmoMC SimplIQ Digital Servo Drives-Drum HV User Manual
Page 66: Advanced positioning control modes, Advanced filters and gain scheduling, Fully programmable, Chapter 4, Technical specifications
Drum HV (High Voltage) Installation Guide
MAN-DRU-HVIG (Ver. 1.602)
66
Chapter 4:
Technical Specifications
This chapter provides detailed technical information regarding the Drum HV (High Voltage).
This includes its dimensions, power ratings, the environmental conditions under which it can be
used, the standards to which it complies and other specifications.
4.1. Features
The Drum HV (High Voltage)'s features determine how it controls motion, as well as how it
processes host commands, feedback and other input.
4.1.1.
Motion Control Modes
•
Current/Torque - up to 14 kHz sampling rate
•
Velocity - up to 7 kHz sampling rate
•
Position - up to 3.5 kHz sampling rate
4.1.2.
Advanced Positioning Control Modes
•
PTP, PT, PVT, ECAM, Follower, Dual Loop, Current Follower
•
Fast event capturing inputs
•
Fast output compare (OC)
•
Motion Commands: Analog, Pulse-Width Modulation (PWM), digital (SW) and Pulse and
Direction
4.1.3.
Advanced Filters and Gain Scheduling
•
“On-the-fly” gain scheduling of current and velocity
•
Velocity and position with “1-2-4” PIP controllers
•
Automatic commutation alignment
•
Automatic motor phase sequencing
4.1.4.
Fully Programmable
•
Third generation programming structure with motion commands – “Metronome”
•
Event capturing interrupts
•
Event triggered programming
•
32 KB memory