ERICO Practical Guide to Electrical Grounding - Manual (Page 128)

121 References and Bibliography
REFERENCES
[1] ANSI/NFPA 70-1996, National Electrical Code
(NEC).
[2] ITU K27-1991, Bonding Configurations and
Earthing Inside a Telecommunication Building.
(Formerly CCITT.)
[3] ANSI/NFPA 780-1995, Standard for the installation
of Lightning Protection Systems.
[4] UL 96A, Standard for Installation Requirements for
Lightning Protection Systems.
[5] ANSI C2-1997, National Electrical Safety Code
(NESC)
[6] CSA Standard C22.1-94 Canadian Electrical Code
Part I (CEC)
BIBLIOGRAPHY
ANSI/IEEE Std 80, IEEE Guide for Safety in AC
Substation Grounding.
ANSI/IEEE Std 81, IEEE Guide for Measuring Earth
Resistivity, Ground Impedance and Earth Surface
Potentials of a Grounding System.
ANSI/IEEE Std 142, IEEE Recommended Practice for
Grounding of Industrial and commercial Power Systems.
ANSI/IEEE Std 487, IEEE Guide for the Protection of
Wire-line Communication Facilities Serving Electrical
Power Stations.
ANSI/IEEE Std 837, IEEE Standard for Qualifying
Permanent Connections Used in Substation Grounding.
ANSI/IEEE Std 1100, IEEE Recommended Practice for
Powering And Grounding Sensitive Electronic Equipment.
ANSI/T1.313 Standard, Electrical Protection for
Telecommunications Central Offices and Similar Facilities.
ANSI/TIA/EIA-607, Commercial Building Grounding and
Bonding Requirements for Telecommunications.
ANSI/UL 467 Standard for Grounding and Bonding
Equipment.
MIL HDBK 419A Grounding, Bonding and Shielding for
Electronic Equipment and Facilities, Vol. 1 & 2.
MIL-STD-188-124B Military Standard Grounding,
Bonding and Shielding.
NEMA CC-1, Electrical Power Connections for
Substations.
Grounding Book 4/14/99 10/5/99 6:02 PM Page 121 (Black plate)