Barco DCS-200 - Manual (Page 134)

134 DCS-200 • User’s Guide
_K==oÉãçíÉ=`зенкзд
Remote Commands
oÉãçíÉ=`згг~еЗл
This section lists DCS-200 remote commands, in the following categories:
• Ethernet Commands
• Input Commands
• Output Commands
• System Commands
• Key Commands
• LOGO Commands
bíÜÉêåÉí=`згг~еЗл
ae`m
• Description: Enables/disables DHCP mode.
• Command Format: DHCP -m (mode)
• Command Params: -m mode: 0-disable, 1-enable (default: on)
• Query Format: DHCP -?
• Query Response: DHCP -m (mode) --min 0 --max 1
bj^`
• Description: Gets MAC Address.
• Command Format: N/A
• Command Params: N/A
• Query Format: EMAC -?
• Query Response: EMAC -a (addr)
• Response Params: -a (addr): MAC address formatted xx.xx.xx.xx.xx.xx