Barco DCS-200 - Manual (Page 152)

152 DCS-200 • User’s Guide
_K==oÉãçíÉ=`зенкзд
Remote Commands
• Parameters: -m (mode): 0 - off, 1 - on
• Query Format: CONTEXT -?
• Query Response: CONTEXT -m (mode) --min 0 -- max 1
af^d
• Description: Performs a system diagnostic test. The results are logged into a file
which may be displayed using DIAGD.
• Command Format: DIAG
• Parameters: None
• Query Format: N/A
• Query Response: N/A
af^da
• Description: Display the results of the last performed system diagnostic test.
• Command Format: DIAGD
• Parameters: None
• Query Format: N/A
• Query Response: N/A
fpq^q
• Description: Query only command for the input status type and format.
• Query Format: ISTAT -?
• Query Response: ISTAT -t "(input type)" -f "(input format)"
i`io
• Description: Clear the selected log (ram copy, not flash).
• Command Format: LCLR -l (log)
• Parameters: -l (log): 0-combined, 1-debug, 2-warning, 3-error
• Query Format: N/A
• Query Response: N/A
iajm
• Description: Display the current log messages (ram copy, not flash) for the
selected log.
• Command Format: LDMP -l (log)
• Parameters: -l (log): 0-combined, 1-debug, 2-warning, 3-error
• Query Format: N/A
• Query Response: N/A