Barco DCS-200 - Manual (Page 138)

138 DCS-200 • User’s Guide
_K==oÉãçíÉ=`зенкзд
Remote Commands
• Parameters:
-i (input): 1 - 9
-r (ratio): 1 - 1:1, 2 - 3:2, 3 - 4:3, 4 - 5:4, 5 - 16:9
-c (custom ratio): .75 - 3.0
• Query Format: IAR -i (input) -?
• Query Response: IAR -i (input) -c (custom ratio) --min .75 -- max 3
or
IAR -i (input) -r (ratio) --min 1 -- max 5
• List Format: IAR -i (input) --list
• List Response: 1:"1:1"
2:"3:2"
3:"4:3"
4:"5:4"
5:"16:9"
f^rql`=
• Description: Attempts to detect and adjust input video to the active video area.
This command is only for analog input types.
• Command Format: IAUTOC -i (input)
• Parameters: -i (input): 1 - 8 for adjustments (7 & 8 only if itype is analog)
• Query Format: N/A
• Query Response: N/A
f^s^fi
• Description: Query-only command for input availability. This command can be
used to identify whether the SDI board is present by querying for input 9.
• Parameters: -i (input):1 - 9
-m (mode): 0 - input not available, 1 - input available
• Query Format: IAVAIL -i (input) -?
• Query Response: IAVAIL -i (input) -m (mode)
f_oq
• Description: Input Brightness Adjust
• Command Format: IBRT -i(input) -b (bright)
• Parameters:
-i (input): 1-9
-b (bright): 75.0% - 125.0% (Default: 100%)
• Query Format: IBRT -i (input) -?
• Query Response: IBRT -i (input) -b(bright) --min 75 --max 125