Gateway, Subnet, Input commands – Barco DCS-200 User Manual
Page 135: Autoacq, Gateway ip subnet, Acq autoacq, Fåéìí=`згг~езл, K==oéãçíé=`зенкзд
DCS-200 • User’s Guide
135
_K==oÉãçíÉ=`зенкзд
Remote Commands
d^qbt^v
•
Description: Sets gateway to be used when DHCP is OFF.
•
Command Format: GATEWAY -s (static addr)
•
Command Params: s static addr: format will be: xxx.xxx.xxx.xxx
•
Query Format: GATEWAY -?
•
Query Response: GATEWAY -a (active addr) -s (static addr)
•
Query Params: -a (active addr): Active gateway active address
fm
•
Description: Sets Static IP Address to be used when DHCP is OFF.
•
Command Format: IP -s (static)
•
Command Params: -s static addr with format xxx.xxx.xxx.xxx
•
Query Format: IP -?
•
Query Response: IP -a (active addr) -s (static addr)
•
Response Params: -a (active addr): returns active address
pr_kbq
•
Description: Sets subnet mask to be used when DHCP is OFF.
•
Command Format: SUBNET -s (static addr)
•
Command Params: -s static address formatted xxx.xxx.xxx.xxx
•
Query Format: SUBNET -?
•
Query Response: SUBNET -a(active addr) -s(static addr)
•
Response Params: -a(active addr): returns active address
fåéìí=`згг~еЗл
^`n
•
Description: Input Source Acquire. Does a "force" acquire of the input.
•
Command Format: ACQ -i (input)
•
Parameters: -i (input): Input number
•
Query Format: N/A
^rql^`n
•
Description: Auto Input Acquisition Mode
•
Command Format: AUTOACQ -m (mode)
•
Command Params: -m mode: 0-off, 1-on (Default: on)
•
Query Format: AUTOACQ -?
•
Query Response: AUTOACQ -m (mode) --min 0 --max 1