Barco DCS-200 - Manual (Page 157)

DCS-200 • User’s Guide 157
_K==oÉãçíÉ=`зенкзд
Remote Commands
ildlp^sb=
• Description: Save the image on Program output to the selected logo frame store
and file.
• Command Format: LOGOSAVE -l (logo)
• Command Params: -l logo: 1 - 3 (Default: 1)
• Query Format: N/A
• Query Response: N/A
ildlpbi=
• Description: Logo selection
• Command Format: LOGOSEL -l (logo)
• Command Params: -l logo: 1 - LOGO1, 2 - LOGO2, 3 - LOGO3 (Default:
LOGO1)
• Query Format: LOGOSEL -?
• Query Response: LOGOSEL -l (logo) --min 1 --max 3
• List Format: LOGOSEL --list
• List Response: 1:"LOGO1"
2:"LOGO2"
3:"LOGO3"
ildlpq^q=
• Description: The logo format status. This command is a query only.
• Command Params: -l logo: 1 - LOGO1, 2 - LOGO2, 3 - LOGO3
• Query Format: LOGOSTAT -l (logo) -?
• Query Response: LOGOSTAT -l (logo) -s (status string)