Barco DCS-200 - Manual (Page 147)

DCS-200 • User’s Guide 147
_K==oÉãçíÉ=`зенкзд
Remote Commands
fsqlq^i
• Description: Input Vertical Total Adjust. This command is a query only.
• Parameters: -i (input): 1 - 9
• Query Format: IVTOTAL -i (input) -?
• Query Response: IVTOTAL -i (input) -t (total)
m`ljm=
• Description: Pulldown Compensation mode adjust.
• Command Format: PCOMP -i (input) -m (mode)
• Parameters: -i (input):1 - 9
-m(mode): 0 - off, 1 - on (Default: off)
• Query Format: PCOMP -i (input) -?
• Query Response: PCOMP -i (input) -m (mode) --min 0 -- max 1
q^hb
• Description: Take the input currently on preview onto program.
• Command Format: TAKE
• Command Params: None
lìíéìí=`згг~еЗл
_i^`h=
• Description: Set the mixer to output black.
• Command Format: BLACK -m (mode)
• Parameters: -m (mode): 0 - off, 1 - on
• Query Format: BLACK -?
• Query Response: BLACK -m (mode) --min 0 --max 1
l^s^fi
• Description: Query-only command used to identify whether the preview output
mezzanine is installed
• Query Format: OAVAIL -o (output) -?
• Parameters: -o (output): 1 - DVI, 3 - Preview DVI
-m (mode): 0 - output not available, 1 - output available
• Query Response: OAVAIL -o (output) -m (mode)
l`p^s=
• Description: Save Output Configuration
• Command Format: OCSAV