Edidtype, Freeze, Iadj – Barco DCS-200 User Manual
Page 137: Edidtype freeze iadj iar, K==oéãçíé=`зенкзд
DCS-200 • User’s Guide
137
_K==oÉãçíÉ=`зенкзд
Remote Commands
•
List Response:
2:"720x480p"
4:"720x575p"
5:"640x480 @59.94"
Etc.
bafaqvmb
•
Description: Sets EDID type. This command is valid only for the DVI input
channels.
•
Command Format: EDIDTYPE -i(input) -t(EDID type)
•
Parameters:
-i (input): 7-8
-t (EDID type): 0 - analog, 1 - digital (Default: 1)
•
Query Format: EDIDTYPE -i(input) -?
•
Query Response: EDIDTYPE -i(input) -t (EDID type) --min 0 --max 1
•
List Format: EDIDTYPE -i(input)
•
List Response:
0:"Analog"
1:"Digital"
cobbwb
•
Description: Freezes the input on program.
•
Command Format: FREEZE -m (mode)
•
Command Params: -m mode: 0-off, 1-on (Default: off)
•
Query Format: FREEZE -?
•
Query Response: FREEZE -m (mode) --min 0 --max 1
f^ag
•
Description: Selects the input path to be adjusted (preview or program).
•
Command Format: IADJ -p (path)
•
Parameters:-p (path): 0-preview, 1-program
•
Query Format: ADJ -?
•
Query Response: IADJ -p (path)
•
List Format: IADJ --list
•
List Response: 0: "PREVIEW"
1: "PROGRAM"
f^o=
•
Description: Adjust Input Aspect Ratio
•
Command Format: IAR -i (input) -r (ratio) -c (custom ratio)