4 installation, 1 mechanical installation, 2 electrical installation – INFICON Helium Leak Detector Modul1000 User Manual
Page 27: 1 mains socket, Mechanical installation, Electrical installation, Mains socket, 4installation, Warning, Caution
Installation
4-1
jinb
80
e1
-h
Op
er
at
in
g M
a
nua
l
(1
01
2)
4
Installation
4.1
Mechanical Installation
The Modul1000 can be mounted on and below desktop workplaces. The leak test
device may only be operated on horizontal surfaces. During the installation, make
sure that the Modul1000 gets enough fresh air, especially the air inlet and outlet
openings on the front and the back side have to be free. The maximum permissible
ambient temperature of the Modul1000 may not be exceeded during operation!
4.2
Electrical installation
4.2.1
Mains socket
The device is connected to the power system via the delivered power cable. Please
find the respective socket on the back of the device. (refer to
/9).
Warning
Back injury through heavy loads.
Two people should carry the Modul1000 or use a lifting device.
Caution
Place the device in a way that you can always reach the power plug.