Chapter 3 menus – INFICON SQC-222 Thin Film Deposition Controller User Manual
Page 58
Advertising
Chapter 3
Menus
3-20
Rate Sampling: Rate sampling can extend the life of crystals. With rate sampling, the
deposition rate is sampled for a period of time, then the sensor shutter is closed. Power
is then held at the same level as the final power setting during the sample period.
•
Continuous selects no sampling, the sensor shutter remains open during deposition.
•
Time based sampling opens the shutter for a fixed period of time, then closes it for a
˛fixed time.
•
Accuracy based sampling opens and closes the shutter at the rate required to
maintain the desired accuracy during the hold phase.
Advertising