INFICON SQC-222 Thin Film Deposition Controller - Manual (Page 70)

Chapter 4 Maintenance
4-4
4.5 Full Rack Extender Installation
The Full Rack Extender option (PN 900-007) mounts an SQC-222 into a full width 19”
rack space. Assemble the two 3” x 5
¼” Extender Kit side panels and the larger front
and rear panels into a box configuration using the eight 6-32 flat-head screws.
Thread two 10-32 shoulder screws from the inside of one of the box sides until the
threads extend fully to the outside. Now attach the Extender Kit to the SQC-222 by
threading the shoulder screws into the matching holes in the SQC-222 covers.
Attach the rack mounting ears with the 10-32 flat-head screws provided. Carefully lift
the assembly into a full width, 5¼” high rack space. Attach the assembly to the rack
with the 10-32 Phillips screws (not provided).