INFICON Cygnus Editor Software Manual - Manual (Page 29)

2 - 9
IP
N 07
4-
39
4-
P1
A
Cygnus Editor Operating Manual
2.3 Controller Configuration and Setup
When a controller first comes online, an icon representing the controller is placed
on the System Setup screen. One page is available to configure system
parameters for the controller. This Data Settings page is accessed by right-clicking
on the controller icon (
Figure 2-10 ) and selecting Properties.
Figure 2-10 Accessing the Controller Properties
NOTE: The Controller Icon will normally appear as shown in Figure 2-10 . If the
Controller Icon is shown with a blue ’X’ on it, that indicates that the
Controller has never been online. If the Controller Icon is shown with a red
’X’ on it, that indicates that the Controller was once online but is currently
offline.
The Data Settings page ( Figure 2-11 ) allows the configuration of the event
reporting and logging facility and the specification of the directory paths for storage
of event data, controller data, configuration, and other Cygnus Editor files.