5 setting a mark – INFICON Cygnus Editor Software Manual User Manual
Page 68
4 - 6
IP
N 07
4-
39
4-
P1
A
Cygnus Editor Operating Manual
4.2.2.5 Setting a Mark
The Set Mark button (
) on the Control Panel allows for a Mark, and text
description, to be applied to the data. The Set Mark function will Freeze the graph
and provide a crosshair cursor ( + ) to select the data scan to be marked. Text
information (for the Marks History log) can be added in the Set Mark dialog (see
). That Mark is then indicated along the X-axis with a colored diamond
Marks are automatically generated for:
the start of the Data Logger, to store a "benchmark" of the crystal status
any Crystal state change - Crystal Good, Crystal Invalid, Crystal Failure
any Channel state change.
Figure 4-9 Set Mark button
Figure 4-10 Set Mark Dialog
Figure 4-11 Mark Indicator on Graph