INFICON Cygnus Editor Software Manual User Manual
Page 57
3 - 19
IP
N 07
4-
39
4-
P1
A
Cygnus Editor Operating Manual
Figure 3-23 Event Editor, Parameter entry dialog
Once the desired Events and Actions have been selected (see
for an
example), the actual Logic Statement can be entered.
NOTE: If an incorrect Parameter is entered, it can be corrected by pressing the
letter button (e.g.
) beneath the Event or Action column heading.
This will promote the parameter dialog again for editing.
Figure 3-24 Logic Statement Example of Events and Actions
In the Logic Statement section, enter the letters of the Events and Actions,
separated by a Boolean operator, in the appropriate entry boxes. For example, the
Events and Actions shown in
could be entered as shown in
, which when translated says:
"IF External Input number 10 is active AND Deposit on Channel 1 is active
THEN Start Channel 2 AND Start Channel 3 AND turn off External Output
number 6".