Figure 2-11, Allows the configur – INFICON Cygnus Editor Software Manual User Manual
Page 30
2 - 10
IP
N 07
4-
39
4-
P1
A
Cygnus Editor Operating Manual
Figure 2-11 Controller Data Settings
Event Data
Notification . . . . . . . . . . . . . . . . . . . This parameter allows the specification of the
level of errors that will be reported to the user
in an error dialog box. The choices are
Errors, Warnings and Beep. If only Beep is
selected then the error dialog box will not be
displayed when an error is detected, but
rather the PC will beep once indicating an
error has occurred. The error log can be
examined to determine the nature of the
error.
Logged Items
Errors . . . . . . . . . . . . . . . . . . . . . . . When checked, all errors reported from this
controller will be logged in the event log file.
Warnings . . . . . . . . . . . . . . . . . . . . . When checked, all warnings reported from
this controller will be logged in the event log
file.
Events . . . . . . . . . . . . . . . . . . . . . . . When checked, all events for this controller
will be logged in the event log file.