INFICON Cygnus Editor Software Manual - Manual (Page 42)

3 - 4
IP
N 07
4-
39
4-
P1
A
Cygnus Editor Operating Manual
Figure 3-5 Selecting A New Or Existing Configuration
Selecting New will open the Configuration Editor immediately to the main window
(see
section 3.3 on page 3-4 ).
Figure 3-6 Selecting A Configuration To Open
If the Files of type box does not show a Cygnus Configuration ( *.isc ) or All Files
(*.*), then click on the pulldown and select one of these types from the list. Clicking
on a filename will display a few lines of text in the preview box which describe the
Configuration. Once a file is selected and opened, the main window of the
Configuration Editor will be displayed (see
Figure 3-7 ).
3.3 Configuration Editor Main Window
Figure 3-7 shows the Main Window of the Configuration Editor. The Controller
Name and Config Name appear in this window to identify which Cygnus Controller
this Configuration is for and in which file this Configuration will be stored. These two
items can be changed at any time before the Configuration is saved.
NOTE: The Controller Name is not stored in the Cygnus Controller, it is simply a
text field used on the PC to identify the intended target for the
Configuration file.