INFICON Maxtek PM-700 Plating Monitor User Manual
Page 41
Advertising
PM-700 SERIES PLATING MONITOR
33
parameter allows the user to
set the maximum allowable
plating rate. The displayed
rate will flash rapidly, and
the High Rate Alarm Output
will come on.
Plate
Current
Density
Plate Current Density
Establishes the current
density for the Sensor
Crystal electrode.
0.000 1.615 0.001
Tooling
Factor
%
Tooling Factor Percentage
Use to calibrate for the
different in thicknesses, if
any, between the Sensor
Crystal and the plating
substrate.
1.000 999.9 100.0
Advertising