Landoll SSP2101 High Capacity Sure Stand Seeder - Manual (Page 11)

2-1
Chapter 2
Assembly Instructions

CAUTION
The intent of this chapter is to provide instruction,
allowing you to safely and correctly assemble your
Brillion product.
NOTE
In most of the following illustrations, the Pick Up model is
shown. Pull Type seeders are assembled in the same
way unless otherwise noted.
If your seeder was shipped with unattached roller
assemblies, follow the procedure on Pages 2-1 through
2-8.
If your rollers were assembled at the factory, See
Page 2-9. Pull Type Seeder Assembly
Step 1
Support the Frame and Seedbox Assembly with a hoist
or by similar means capable of supporting its weight
without tipping. See Figure 2-1.
Figure 2-1: Pull Type Seeder Step 1
Do not work on or under this machine unless
securely
blocked and supported by a hoist or
tractor or by other sufficient means!
FRONT
LEFT SIDE
RIGHT SIDE
Frame & Seedbox Assembly
Pull Type Model Seeder