Landoll SSP2101 High Capacity Sure Stand Seeder - Manual (Page 8)

1-4 1P126
INTRODUCTION AND SAFETY INFORMATION
Safety Chain
Use a chain with a strength rating equal to or greater than
the gross weight of towed machinery, in accordance with
ASAE S338.2 specifications. If two or more machines are
pulled in tandem, a larger chain may be required. Chain
capacity must be greater that the total weight of all towed
implements.
A second chain should be used between each
implement.
Attach the chain to the tractor drawbar support or
specified anchor location. Allow only enough slack in the
chain to permit turning. The distance from hitch pin to
attachment point or intermediate support point should not
exceed 9 inches. See Figure 1-2.
Machines with a 3 hole drawbar, See Figure 1-2.
Replace chain if any links or end fittings are broken,
stretched or damaged.
Do not use a safety chain for towing.
Figure 1-2: Safety Chain Hook-Up
SEEDER OP SAF
OPTIONAL
HITCH
ORIENTATION
LOCKNUT,3/4-10
HHCS,3/4-10 X 2 1/4”
9” MAX.
SAFETY CHAIN
FLAT WASHER, 3/4”