Landoll SSP2101 High Capacity Sure Stand Seeder User Manual
Page 21
ASSEMBLY INSTRUCTIONS
2-11
Pull Type Seeder Assembly (Continued)
4.
Attach hitch, so that safety chain can be properly
attached and then attach drawbar to a suitable
tractor.
5.
Install spindles in wheel arms and secure in outer
spindle holes with 1/2” x 3” bolts, lockwashers and
nuts. See Figure 2-13.
6.
Install wheels and tires.
7.
If seeder is equipped with rear box, attach 5K395
Caution Decal.
Figure 2-13: Install Wheels
8.
Connect the hydraulic hoses to the tractor and raise
seeder into transport position.
9.
Install the transport locks.
10. Remove 5/8” shipping bolt which locks rear roller
arms down. One bolt is used on each side of the
machine. See Figure 2-14.
Figure 2-14: Shipping Bolt
Figure 2-15: SMV Sign
NOTE
If the bracket for the SMV sign has been shipped loose,
attach it as shown using 3/8” x 1 1/4” bolts, washers, and
nuts provided. See Figure 2-15.
Screw,1/2-13 X 3”
Wheel Bolt,
1/2-20 X 1”
Lock Nut,
1/2-13
Shipping
Bolt
Front Seedboxes