Landoll PT Series 10 through 20 Transport Pulverizer - Manual (Page 36)

3-2 9J017
OPERATION
Parking the Transport Pulverizer
The best way to park the pulverizer is to place the
machine in its desired location. Once there, remove the
transport pin and place it in the rear-most hole. Lower the
machine to the ground. Place blocks in front and behind
the pulverizer to prevent it from rolling when unhitched.
Lower the jack and adjust height of drawbar to allow for
unhitching. Then unhitch the pulverizer.
Parking the pulverizer with the wheels in transport
position, start by placing the jack in the foremost position.
Place the blocking in front and behind the pulverizer
wheels to prevent rolling. Adjust the jack height to allow
for unhitching and disconnect of the pulverizer.