Landoll PT Series 10 through 20 Transport Pulverizer User Manual
Page 16
Advertising
2-6
9J017
ASSEMBLY
8.
Position and block up the center frame against the
end of the drawbar, lining up the holes in the drawbar
with the center frame mounting bracket and pin them
together. See Figure 2-7.
Figure 2-7: Wheel and Axle Installation - 4 of 4
DRAWBAR
MACHINERY
BUSHING,
1 1/4” DIA.
PIN, 1 1/4”
DIA. x 10”
COTTER PIN,
1/4” x 2”
Advertising
This manual is related to the following products: