Landoll PT Series 10 through 20 Transport Pulverizer - Manual (Page 35)

3-1
Chapter 3
Operation
Operation of the Transport
Pulverizer
This chapter will cover the basic operation and
procedures for the Landoll Brillion Transport Pulverizer.
Be sure to read and understand the Safety Procedures
and Cautions starting on page 1-1.
Field Operation
The Transport Pulverizer is designed to be pulled behind
field cultivators and discs. It can also be used as an
individual unit with the tractor to prepare a seedbed or,
after seeding, to break down and pulverize large surface
clods. The long drawbar allows for easy, short turns when
pulled behind other equipment.
During field operation, it is not necessary to raise the
machine when making turns, but turns should be made
wide. Slow down when operating on rocky soil.
Transporting
To prepare the machine for transport, hitch pulverizer to
desired device, lower jack and pin it up out of the way.
Then raise the machine fully and install the transport pin
in its position. See Figure 3-1. The rear-most hole is used
for pin storage during field operation.
IMPORTANT
It is the responsibility of the owner/operator to
comply with all applicable laws regarding slow
moving vehicle signs, warning lights, and reflectors.
Figure 3-1: Transport Pin
TRANSPORT PIN
TRANSPORT PIN
STORAGE HOLE