Landoll PT Series 10 through 20 Transport Pulverizer - Manual (Page 18)

2-8 9J017
ASSEMBLY
Drawbar Brace Installation
NOTE
Both braces and ends are identical.
1. Using Grade 5, 1-8 x 5 1/2” Screws and 1” Flat
Washers and Nuts, attach the proper end of each
brace to the center frame.
2. Using Grade 5, 1/2-13 x 7 1/2” Machine Bolts, 1/2”
Lockwashers and Nuts, bolt the other ends to each
other and the drawbar. See Figure 2-9.
Figure 2-9: Drawbar Brace Installation
NUT, 1”
FLAT WASHER, SAE
FLAT WASHER, STD
FLAT WASHER, SAE
SCREW, 1”
SCREW,
1/2” x 7 1/2”
NUT, 1/2”
LOCKWASHER, 1/2”
DRAWBAR
BRACE