Leica Biosystems CM3050 S - Manual (Page 34)

34 Instructions for Use V 1.7 RevC - 08/2014
5. Operation
5.4 Control panel 2
Functional area A:
• Sectioning modes
• Sectioning window
• Sectioning speed
• Emergency stop function
Functional area B:
• Coarse feed
• Trimming
• Section thickness selection
Functional area C:
• Start / Stop sectioning
Instruments without sectioning motor Instruments with sectioning motor
Functional area B:
• Coarse feed
• Trimming
• Section thickness selection
A
B
C
B
In instruments with section-
ing motor, the control panel
is equipped with three func-
tional areas: A, B and C (see
large diagram).
In instruments without sec-
tioning motor, control panel
2 only consists of functional
area B (see below)