Leica Biosystems CM3600 XP - Manual (Page 23)

23 Leica CM3600 XP – Cryomacrotome
Prior to any work involving the knife, microtome or inside the
cryochamber, swing the knee lever upwards.
For any work involving the knife, microtome or inside the
cabinet always wear special protective gloves.
For reasons of safety and accuracy, the maximum trimming
thickness should not exceed 100 μm per section.
When trimming biological material (particularly bone),
section thickness should not exceed 50 μm.
Never try to catch or grab the knife.
Never introduce your hands into the space between
specimen and knife.
Caution when adjusting the knife holder from
100 to 200 mm – a crushing hazard exists.
Radioactive specimen waste must be disposed of according
to the local radiation safety regulations.
For removing the microtome (approx. 190 kg) from the
cryochamber, a ceiling crane capable of carrying that weight
should be available.
For safety reasons, we strongly advise you against lifting the
microtome (approx. 190 kg) from the cryochamber without
appropriate lifting gear. Do not attempt to lift the microtome
from the chamber manually, even if several persons are there
to help.
3. Safety