Leica Biosystems CM1100 - Manual (Page 11)

11 Leica CM1100 – Cryostat
6. Unpacking and installation
6.1 Unpacking
Check the transport crate for external dam-
age on arrival of the shipment.
If damages are obvious, please make a com-
plaint to your carrier.
• Remove 2 screws (1) at the top and bottom on all of
the four sides of the crate (2).
• Remove the lid (3).
• Lift the body of the crate (2) straight up.
• Take the accessory box (4) from the pallet (5).
• Remove the foam plate (6).
• Remove the inner cardboard box (7) by lifting it up-
wards.
• Unscrew the 4 angle brackets (8) by loosening 2
screws each.
Do not carry or reposition the instrument by
holding it at parts of the housing or at the
handwheels!
Only use the carrying handles at the front and
rear for carrying!
• Hold the instrument at the carrying handles (9) at
the front and rear and lift it from the pallet.
• Take the insert (10) out of the accessory box (4) and
remove all accessories.
Fig. 11
5
4
10
7
6
1
3
1 1
2
1
8
8
9