Leica Biosystems SP2600 - Manual (Page 38)

38 Supplementary instruction manual V 1.2 – 07/2002
5.7.1 Perspective view of the pre-milling procedure
5. Operation
Pre-milling procedure
The milling spindle carrying the pre-miller rotates clockwise (circular arrow
(1)) while the specimen sledge passes underneath the miller in the direction
of arrow (2).
The pre-miller leaves a serrated surface texture which is then in a second
milling procedure milled to a mirrorlike, even surface by the finishing miller
(see Fig 5.24 p. 42).
Fig. 5.23
1
2