Leica Biosystems SP2600 - Manual (Page 45)

45 Leica SP 2600 – Ultramilling attachment
7. Cleaning, disinfection and maintenance
7.1 Cleaning and disinfection
Only authorized service technicians may access the internal com-
ponents of the instrument for service and repair!
Cleaning detergents appropriate for the ultramilling attachment -
varnished surfaces:
• mild laboratory detergents (slightly moistened cloth)!
non-varnished metal parts:
• mild laboratory detergents,
• xylene substitutes (slightly moistened cloth)
• alcohol (slightly moistened cloth).
No liquids may enter the interior of the instrument during cleaning!
Cleaning
• Clean the basic instrument Leica SM2500 as per the instructions in chap-
ter 7.1, pages 65 - 67 of the Leica SM2500 instruction manual.
• Clean the Leica SP2600 with a soft, slightly moistened cloth using one of
the detergents listed above.
• Clean diamond millers with a soft cloth moistened with alcohol.
For disinfection of the instrument and accessories use Leica Cryo-
fect or other commercial disinfectants. - Use all disinfectants ac-
cording to the manufacturer’s instructions!
No liquids may enter the interior of the instrument during disinfec-
tion!
When disinfecting, wear appropriate goggles and mask as well as
protective gloves!
Dispose of potentially infectious specimen material as per the
laboratory regulations applicable in the country of operation!
Disinfection
• Remove potentially infectious milling waste / remaining samples and dis-
pose of as per the regulations applicable.
• Disinfect instrument and accessories as per the instructions of the disin-
fectant manufacturer.