Optional accessories – Leica Biosystems RM2235 User Manual

Page 40

Advertising
background image

38

Instructions for Use V 1.8 RevC – 09/2013

6.

Optional Accessories

Lateral displacement (only for knife holder E)

The lateral displacement feature of the knife

holder base enables the use of the entire length

of the blade, eliminating the need for readjusting

the knife holder. The knife holder E consists of a

segment arch A (with lever (11)) and the clamp

mount B (with lever (10) and ejector (13)).

The extreme left and right positions as well as

the middle position are each marked with a click

stop.
• To release the clamp, rotate the lever (11) on

the left side of the knife holder forwards.

• Move the knife holder sideways.

• To clamp, rotate the lever (11) back.

11

Note on the knife holder E:

The knife holder E is an important precision component, the quality and

precise adjustment of which have a lasting effect on the entire function of

the microtome. In case of malfunctions or damages to the clamp mount,

it is always required to replace the clamp mount, including the pertinent

clamping lever.

Leica Biosystems offers special prices for new clamp mounts in case of

damages to the clamp mount after the warranty has expired.

In this way, perfect function of the device can be ensured over the course

of many years.

Knife holder E

a

B

10

To ensure a proper sectioning result, clamp

mount B must be securely clamped onto segment

arch A.

The clamping is carried out using an eccentric

at the lever (11). The clamping force is adjusted

with the setscrew (12) on the underside of the

segment arch. The setting of the clamping is car-

ried out so that the clamping lever can be rotated

to the stop with constantly increasing resistance.

Setting of the clamping system of the clamp mount on the segment arch

12

Adjust the clamping with a 2.5 mm Allen key at

the setscrew (12) so that the lever initially "slips"

when the lever is activated. Continue turning the

setscrew (12) a little bit (approx.

1

/

4

turn to the

left or right) then check that the lever no longer

"slips", but also does not jam "heavily".

(The language CD features a short video film for

this purpose.)

13

Fig. 36

Advertising