Lenze EPM Programmer EEPM1RA - Manual (Page 13)

11 ENGLISH
Operation
4.6 Menu Overview
After power is switched on and the initialization screens have been displayed, the primary functions of the EPM Programmer
are accessed by pressing the MENU button.
MASTER –> EPM SECTION 4.7
MENU
FILE –> EPM SECTION 4.8
MENU
EDIT EPM SECTION 4.9 (servo config. only)
MENU
EDIT FILE SECTION 4.10
MENU
CREATE NEW FILE SECTION 4.11
MENU
DELETE FILE SECTION 4.12
MENU
LOAD CFG EPM SECTION 4.13
MENU
DISPLAY CONTRAST SECTION 4.14
MENU
MISCELLANEOUS SECTION 4.15
MENU
Tip!
• When copying to an EPM using MASTER->EPM or FILE->EPM, all data on the target EPM will be overwritten.