Lenze E94AZPS - Manual (Page 32)

Technical data 2
l
32 EDK94ZPS113 DE/EN/FR/ES/IT 4.0
2 Technical data
The standards, operating conditions and rated data correspond to the ones of
the standard device for which the installation backplane is intended.
Assignment of installation backplane ˘ standard device
Axis controller type Installation
backplane type
Busbar mounting set /
fuse 1)
Device size
E94ASxE0024
E94AZPS0034
E94AZJA003/
EFSAR0016ARHN
I
E94ASxE0034
E94ASxE0044
E94AZPS0074
E94AZJA007/
EFSAR0040ARHN
II
E94ASxE0074
E94ASxE0134
E94AZPS0244
E94AZJA024/
EFSAR0100ARHN
(tightening torque:
3.4 Nm (30lb−in))
III E94ASxE0174
E94ASxE0244
1) The busbar mounting set with fuse is available as an accessory. It is required when
Single Drives are operated in DC−bus connection via the DC busbar.
)
Note!
The devices must be installed in housings (e.g. control cabinets) to
meet applicable regulations.