Lenze E94AZPS - Manual (Page 43)

Electrical installation
Wiring
Terminal assignment
4
l
43 EDK94ZPS113 DE/EN/FR/ES/IT 4.0
Motor
Terminal X105
(right part) Labelling Description
U
V
W Connection of the motor phases
" Functional earth
Connect the shields of the motor phases and of the
optional motor brake control separately and with a
surface as large as possible to the shield sheet. Use
EMC wire clamp or EMC shield clamp for fixing.
+ Connection for the PE conductor on the motor side
with M5 ring cable lug
SSP940X105
Terminal data
Max. conductor cross−section Tightening torque !
[mm 2 ] [AWG] [Nm] [lb−in]
Device sizes 1 + 2:
flexible
with wire end
ferrule
2.5 12 0.5 ... 0.6 4.5 ... 5.3 PZ0
Device size 3:
flexible
with/without wire
end ferrule
10/16 6 1.2 ... 1.5 10.6 ... 13.3 PH1