Lenze EMF2179IB - Manual (Page 65)

Commissioning
Possible settings via DIP switch
7
EDKMF2179 DE/EN/FR 4.0
65
l
H1inbet−DeN−uebrate
7 Commissioning
Possible settings via DIP switch
By means of the DIP switches arranged on the front, the following can be set:
ƒ Device address (switches 1 ... 6)
ƒ Baud rate (switches 7, 8)
ƒ Software compatibility to the EMF2175IB communication module (switch 10)
Switch 9 has no function.
The Lenze setting of all DIP switches is OFF.
)
Note!
Switch off the voltage supply of the communication module, and then switch
it on again to activate the changed settings.