Lenze EPM-H510 - Manual (Page 57)

Commissioning
L
57 EDBEPM-H510 DE/EN/FR 4.0
4.1.1 Touch screen calibration
! It is possible that you will be asked to calibrate the touch screen when you switch on the
module for the first time.
! The calibration defines the positions of the sensitive fields on the display.
$ $ $ $
Note!
!
Ensure careful calibration of the display.
! If the calibration is faulty or inexact, switch off the keypad and restart it before
you repeat the calibration.
What to do
1. Switch on the supply voltage for the keypad.
0
H510 TRANSFER PAGE
Graphic controller BOOT check:
Please touch bottom left
The unit is initialized.
0
H510 TRANSFER PAGE
Graphic controller BOOT check:
Please touch bottom left
2. Exactly touch field & . 0
H510 TRANSFER PAGE
Graphic controller BOOT check:
Please touch bottom left
3. Exactly touch field ' .
1 H510 TRANSFER PAGE
Graphic controller BOOT check:
Please touch top right
Calibration is completed.
H510 TRANSFER PAGE
Graphic controller BOOT check:
Please wait
The transfer page appears.
Port : NET
Driver : CAN Lenze M
Ver : 1.06
Addr : NO ADDRESS
Error : RESET
PROG
ESC
TRAN
PAGE
Show/Hide Bookmarks