Lenze EPM-H510 - Manual (Page 60)

Commissioning
L
60 EDBEPM-H510 DE/EN/FR 4.0
4.2.3 Disconnecting from the PC
1. Switch off the PC.
2. Switch off the supply voltage for the keypad.
3. Remove the EPZ-H110 download cable from the keypad and the PC.
4. Switch on the supply voltage for the keypad.
The keypad is now ready for operation.
4.3 Status messages for the keypad
The keypad status can be queried any time. Information can be obtained about
!
the interface (port)
! the name of the loaded driver
! the version of the loaded driver (Ver)
!
mains address of the keypad (Addr VT)
! the last error
If you want to ... Press keys ... Example
A) query the status of the keypad. For this,
touch the display in the
• top right & and bottom left ' or
• top left ( and bottom right ) corners.
The corner to be touched first must not
contain a field for a selctable object.
0
1
2
3
B) close the status message.
ESC
Port : NET
Driver : CAN Lenze M
Ver : 1.06
Addr : NO ADDRESS
Error : RESET
PROG
ESC
TRAN
PAGE
Port : NET
Driver : CAN Lenze M
Ver : 1.06
Addr : NO ADDRESS
Error : RESET
PROG
ESC
TRAN
PAGE
Port : NET
Driver : CAN Lenze M
Ver : 1.06
Addr : NO ADDRESS
Error : RESET
PROG
ESC
TRAN
PAGE
Port : NET
Driver : CAN Lenze M
Ver : 1.06
Addr : NO ADDRESS
Error : RESET
PROG
ESC
TRAN
PAGE
Port : NET
Driver : CAN Lenze M
Ver : 1.06
Addr : NO ADDRESS
Error : RESET
PROG
ESC
TRAN
PAGE
Show/Hide Bookmarks