Mk-370exp operation – MK Diamond MK-370 EXP User Manual
Page 23
Advertising
23
CUTTING STRAIGHT EDGES
DO NOT FORCE THE TOOL. It will do the job better and safer at the rate for
which it was designed.
(B)
Position the Adjustable
Cutting Guide to desired cut
length
(A)
Loosen the Adjustable
Cutting Guide retaining
thumbscrew
(C)
Tighten the retaining
thumbscrew
(E)
Turn the motor ON
(D)
Place the tile against the
Ruler/Stop and Cutting
Guide
(F)
Verify cooling flow on both
sides of the blade
(G)
Perform the cut
(H)
Turn the motor OFF when
work is complete
CAUTION
MK-370EXP
OPERATION
Advertising