MK Diamond MK-370 EXP - Manual (Page 39)

39
If the blade is misaligned following this alignment procedure, return the saw to MK Diamond for
repair. The Diamond Blade must be removed and reinstalled when removing the Blade Guard.
BLADE WILL NOT CUT PROPERLY
(B)
Check for proper rotation
(A)
Check for Smoothness or
“Glazing" (Dress blade if
needed)
(C)
Ensure the Blade Core is
not bent and Arbor is not
out of round
(D)
Verify the blade is correct
for the material being used
MOVABLE CUTTING TABLE DOES NOT MOVE CORRECTLY
(B)
Check the Movable Cutting
Table Roller Wheel for wear
replace if necessary
(A)
Check that the Guide Bar is
clean – clean if dirty
MK-370EXP SAW TROUBLESHOOTING