MK Diamond MK-370 EXP - Manual (Page 40)

40
COOLING FLOW
(B)
Remove the Cooling
Transfer Tube from the
Blade Guard inlet
(A)
Check cooling flow
Adjusting Clamp open
(C)
Place Pump into a bucket
of water and check flow
((E)
Remove the Pump
Discharge Fitting and check
(D)
Remove the Cooling
Transfer Tube and check
flow
(F)
Remove the Pump Intake
Screen and check for debris
(G)
Remove the Blade Guard
Intake Fitting
(H)
Clean the Blade Guard
Intake Fitting
MK-370EXP SAW TROUBLESHOOTING