MK Diamond MK-145 - Manual (Page 20)

20
Cleanup:
NEVER empty the Cooling Basin with the ON/OFF switch in the ON position, or
when power is applied.
NOTe: DO NOT use solvents or acids when cleaning the MK-145.
During the cleaning process, do not allow water to enter the motor compartment
of the MK-145.
MK-145 CLEANUP
WARNING
WARNING
(A)
Verify the ON/OFF switch
is in the OFF position
(D)
Empty the contents of
the Water Basin (Conform
to Federal, State and
Local laws, codes and
ordinances relative to
environmental protection
if unsure of disposal
requirements)
(B)
Unplug the MK-145 from
the power source and
unplug the MK-145 from
the GCFI
(E)
Clean the MK-145 with clean,
fresh water and dish soap
then rinse with clean water
and dry the MK-145 with a
clean cloth or paper towels
(C)
Lift Water Basin Cover and
pull out on Water Basing
Cover to remove