MK Diamond MK-145 - Manual (Page 24)

24
MK-145 TROUBLESHOOTING
Blade Will Not Cut Properly:
(A)
If blade is smooth, sharpen
per Blade Sharpening
Section of this manual. If
blade is not glazed,
go to step B
(B)
Verify blade rotates
in counter-clockwise
direction as indicated by
arrow on the diamond
blade. If not rotating
correctly, reposition the
blade to correct position. If
rotating correctly,
go to step C
(C)
If the blade core is bent,
replace blade per the
Diamond Blade Change-
out procedure of this
manual. If the blade core is
not bent, go to step D
(D)
Check Blade is correct
for material being cut.