MK Diamond MK-145 - Manual (Page 7)

7
MK-145 SAFETY
HaZaRD SYMBOlS
eleCTRiCal SHOCK
NeVeR touch electrical wires or components while the engine is running. They can be
sources of electrical shock which could cause severe injury or burns.
ROTaTiNG PaRTS
Keep hands, feet, hair, and clothing away from all moving parts to prevent injury. Never
operate the motor with covers, shrouds, or guards removed.
OVeR SPeeD
NeVeR tamper with the governor components or settings to increase the maximum speed.
Severe personal injury and damage to the engine or equipment can result if operated at
speeds above maximum.
DO NOT eXPOSe TO RaiN
DO NOT expose to rain or use in damp locations.
Sawing and drilling generates dust. Excessive airborne particles may cause irritation to eyes, skin
and respiratory tract. To avoid breathing impairment, always employ dust controls and protection
suitable to the material being sawed or drilled; See OSHA (29 CFR Part 1910.1200).
Diamond Blades improperly used are dangerous. Comply with American National Standards Institute
Safety Code, B7.1 and, Occupational Safety and Health Act covering Speed, Safety Guards,
Flanges, Mounting Procedures, General Operating Rules, Handling, Storage and General Machine
Conditions
( (
)
)
on
WARNING
WARNING