MK Diamond MK-2000 - Manual (Page 16)

MK-2000 Revision 03/05, Effective Date March 21, 2005 Page 16
SETUP, ADJUSTMENT and OPERATION
3. Water Pump Setup for Operation:
The Water Pump can be setup for operation in two ways, External Water Source or Re-circulation.
NOTE: If using a dry blade for operation, DO NOT connect the water pump.
I. External Water Source:
This is the preferred method of cooling.
II. Re-circulation:
NOTE: When using the re-circulation method, the water should be changed often for longer pump life.
Drain Plug
(A)
If not installed, install the Drain
Plug into the Water Pan
(B)
Place the Water Pump in the
back of the Water Pan
(C)
Fill the Water Pan until water
completely covers the Water
Pump suction
Cover Pump
Suction
(A)
Verify or remove the Drain plug
from the Water Pan
(B)
Place the Water Pump in an
external container
(C)
Fill the external container until
water completely covers the
Water Pump suction
Drain Plug
External Water
Container
(D)
Place an external catch basin
below the Water Pan drain hole
Catch
Basin
Water Pump
in container
Cover Pump
Suction
Water
Pump