MK Diamond MK-2000 - Manual (Page 24)

MK-2000 Revision 03/05, Effective Date March 21, 2005 Page 24
SETUP, ADJUSTMENT and OPERATION
Ensure water is not forced into the motor casing when cleaning.
(H)
Remove Drain Plug and
dispose of water (conform to
Federal, State and local laws
for disposal)
Clean Water Basin
(K)
Clean the Movable Cutting
Table Roller Wheels
(J)
Clean the Movable Cutting
Table Guide Rails
(L)
Clean the remainder of the
MK-2000
(G)
Remove the Water Pan
Slide Water Pan
out rear of Saw
Drain Plug
(I)
Clean Water Basin with soap
and clean water
Guide Rail Roller Wheel