MK Diamond PX-3 - Manual (Page 22)

22
GENERAL MAINTENANCE
It is important to lubricate the Cutting Head Torsion Spring after each use. Use light oil such as WD-40 or 3-in-1
when lubricating parts.
Fig. 29 Lubricate Torsion Spring
MONTHLY MAINTENANCE
The following maintenance should be performed Monthly. Items should be inspected as described below.
Fig. 30 Clean and inspect the Inner
Flange and Motor Shaft
Fig. 31 Clean the Blade Retaining
Screw
PX-3 PAVER EXTREME MAINTENANCE