MK Diamond PX-3 - Manual (Page 8)

8
ALWAYS disconnect AC power plug from power source before moving or servicing the machine.
Make sure the OFF/ON power switch on the electric motor is always in the OFF position before inserting
the machine’s power plug into an AC receptacle.
Operate electric motor only at the specified voltage indicated on the nameplate.
NEVER disconnect any “emergency or safety devices”. These devices are intended for operator safety.
Disconnection of these devices can cause severe injury, bodily harm or even death! Disconnection
of any of these devices will void all warranties.
Unauthorized equipment modifications will void all warranties. Manufacturer does not assume responsibility
for any accident due to equipment modifications.
NEVER use accessories or attachments, which are not recommended by MK Diamond for this equipment.
Damage to the equipment and/or injury to user may result.
The PX-3 Paver Saw is designed to be used only with approved diamond cutters.
•
•
•
•
•
•
•
•
•
• NEVER lubricate components or attempt service on a running machine.
Keep the machinery in proper running condition.
Fix damage to the machine immediately and always replace broken parts, or missing decals.
MAINTENANCE SAFETY
WARNING
DO NOT use woodcutting, or carbide blades on this machine! Use ONLY Diamond blades on machine. Use
machine only to cut tile and masonry products. DO NOT use machine to cut wood or wood products.
PX-3 PAVER EXTREME SAFETY