MK Diamond MK-2005G - Manual (Page 26)

MK-2005G Revision 12/00, Effective Date December 26, 2000 Page 26
SETUP, STARTUP, ADJUSTMENT, OPERATION and SHUTDOWN
NOTE: 1. To extend operating life, the MK-2005G should be cleaned following every use.
2. Using a garden hose or pressure washer can force water into the air cleaner or muffler opening.
3. Use care when cleaning around electrical components.
(E)
Remove Drain Plug and dispose
of water (conform to Federal,
State and local laws for disposal)
(D)
Place Engine Switch
in the OFF position
(F)
Clean Water Basin with soap
and clean water
(H)
Clean Movable Cutting Table
Roller Wheels
(G)
Clean Movable Cutting Table
Guide Rails with soap and
clean water
(I)
Clean exterior surface of
MK-2005G (except engine)
with soap and clean water
(K)
Clean Air Filter
(See Maintenance section)
(J)
Clean between engine
mounting plates
(L)
Clean engine throttle linkage
with a dry cloth
Engine Switch Direction of
Movement
Clean Water Basin Drain Plug
Clean Exterior Guide Rail
Roller Wheel
Mounting Plates
Air Filter
Throttle Linkage