MTS TW Elite - Manual (Page 63)

Modifying Tests
Adding and Configuring Test Activities
Test activity sequence
Test activities execute from top to bottom as they appear on the Test Editor. To execute activities
simultaneously, add Parallel Path activities to the test flow. You can also add While Loop, If-Else
Condition, and Periodic Time Event activities to control the test flow.
Test activity property definition
To define the properties of an activity, select the activity icon on the Test Editor, and then select the
Properties panel. You can choose to define properties as fixed values or variables.
Activity Property Example
Error indicators assist property definition
When you add an activity, red error icons appear next to the properties fields when information is missing
or is incorrect.
Example
The example in the following figure shows the error indicators that appear when you initially add a Data
Acquisition activity to the test editor. A similar message also appears in the Error List on the main window.
In this case, all of the error messages disappear when you select a signal and a trigger.
MTS TestSuite | 63
Design Guidelines